CPR – Concrete Patch and Repair

CPR - Concrete Patch and Repair

PART # FXST270

Stone Edge Surfaces CPR-Concrete Patch and Repair is a just add water, high-performance, multi-use, 15 to 30-minute set time, 10,000 psi, no-shrink, non-cracking, easy to use VOH concrete patch and repair material used for general and structural vertical and overhead concrete patching and repairing from ¼” to 6″ thick.

CPR is a polymerized Hydraulic & Portland cement based concrete patching mix that can be shaped and formed on curbs and stairs or troweled vertically or overhead. CPR has superior bonding strength, does NOT require a primer before application, just wet the surfaces before application. CPR also does NOT require “water curing” after application, and only gets warm to the touch not hot.

CPR  can be used in industrial, commercial and residential VOH patching and repairing. CPR can be used as a non shrink grout on small repairs, concrete repair, patching, doweling and anchoring. CPR can also be used as a scratch coat if you are in a pinch and need to apply an overlay in minutes verses hours. CPR can be used as an underlayment for most VOH overlays as well as it can be painted, and can also be integrally or topically colored and/or ground to blend in.

CPR comes in light Concrete Gray: 50 LB Bags (FXCPR50) and 20 LB Pails (FXCPR20)