SwiftSet Self-Leveler

Stone Edge Surfaces SwiftSet Self-Leveler is a NON-Gypsum fast setting, pre-sanded, single component just add water, polymer enhanced, hydraulic cement and proprietary additive self-leveling underlayment or base coat mix used to create a smooth flat and level surfaces for the installation of various flooring types.

SwiftSet Self Leveler creates a strong physical & chemical bond to a concrete substrate with the use of Stone Edge Surfaces Primer 100 (cut 50/50 with water), with the SwiftSet applied while Primer is still fresh, and you can achieve a deeper fill by adding aggregate.

SwiftSet Self-Leveler is for indoor or outdoor use, is ASTM E84 fire rated and dries to over 7,000 psi.

APPLICATION: SwiftSet Self-Leveler can be Poured or Pumped onto a stable substrate. Due to applied mix’s surface tension, you may need to push, screed, porcupine roll the applied mix to keep it flowing until it reaches all barriers.

The following Averages vary by thickness, temp, humidity, etc.:

• Set Time, 2-4 hours
• Walkable in 4-6 hours.
• Floor Coverings in 4–8 hours (non-moisture sensitive).
• Floor Covering 16-24 hours (moisture sensitive)
• Driveable in 24-48 hours.